Skip to main content

BIS Safety Software Canada

BIS Safety Software

Rigging Safety (CAN)

Online Rigging Safety course for Canada: rigging hardware and attachments, pre-work inspections, what worn or damaged components look like, correct rigging and safe load handling. About 2 hours; 80% pass mark.

Rigging Safety (CAN)

This online rigging safety training course gives an in-depth look at the rigging hardware and attachments used to lift, carry and transport loads. Knowing what to look for before you perform a lift is often the difference between a good day’s work and an incident report.

The course covers what safe rigging components look like compared with worn or damaged ones, the difference between a properly and an improperly rigged load, and how to find the specific capabilities of the machine you’re working on.

What you’ll learn

By the end of the course, you should be able to:

  • Understand the importance of proper and up-to-date rigging training
  • Perform pre-work inspections
  • Know which component breakdown hazards to look for and how to prevent them
  • Use rigging correctly
  • Handle loads in a safe manner

What the course covers

  • Rigging components
  • Rigging safe practices and procedures
  • Proper load handling

Who should take this course

Workers who rig loads for cranes and other lifting machines, and the people who work with them during a lift.

Test and certificate

You need a grade of at least 80% to pass, and you can take the course up to 3 times. When you pass, a certificate of completion is available to download.

Frequently asked questions

Is this a hoisting and rigging course?

It covers the rigging side of hoisting: the hardware and attachments used to lift, carry and transport loads, pre-work inspections, correct rigging and safe load handling.

Does the course cover inspecting rigging?

Yes. You learn to perform pre-work inspections and to tell safe rigging components from worn or damaged ones.

How long does rigging safety training take?

About 2 hours, online.

Do I get a rigging certificate?

When you pass with 80% or more, a certificate of completion is available to download. Check with your site or employer whether they need anything more, such as a practical assessment.

Course Details

Course Length

This course will take roughly 120 minutes

Passing Mark

To pass this training course, you need to score 80% or higher on the quiz

Certificate

Upon the successful completion of this course a certificate with your name will be stored on your profile and available to print

Additional Training Courses

Virus Corona: Protegerse Contra el COVID-19

Virus Corona: Protegerse Contra el COVID-19

Este curso brinda conocimientos básicos a los empleados sobre el Virus Corona COVID-19.

OSHA Inspections for Construction & Multi-Employer Worksites

OSHA Inspections for Construction & Multi-Employer Worksites

The prospect of an OSHA inspection can be intimidating. However, these inspections are inevitable and both employers and employees should be well-equipped to handle...

Motorized Pallet Jacks: Safe Operation

Motorized Pallet Jacks: Safe Operation

This web-based course offers comprehensive guidance on the safe usage and potential risks associated with the two most commonly used motorized pallet jack trucks:...