Free webinar, Nov 25: Practical AI in Safety with Ashley Mckie. Save your spot →
BIS Safety Software
Mobile Elevated Work Platform (MEWP Training)
Learn mobile elevated work platform (MEWP) safety in this 60-minute online course: platform types, height hazards, precautions for operators and ground workers, and worksite planning. Earn a certificate of completion when you pass the assessment.
Workers who operate mobile elevated work platforms face real hazards every shift. Tip-overs, electrocutions, and falls injure operators and bystanders alike. This MEWP training course gives operators and supervisors a focused, 60-minute path to recognizing those hazards, selecting the right platform for the job, and applying the precautions that prevent serious incidents.
The course covers the three main platform types, indoor versus outdoor use considerations, worksite planning, and the safety precautions every operator needs before the platform leaves the ground.
Course Overview
This MEWP training course is built around learning modules that walk operators through the full scope of safe platform use. You move from equipment identification through hazard recognition and into worksite planning. Each section builds directly on the one before it.
The modules cover platform types, height hazards, and the precautions that protect operators and ground-level workers alike. You finish with a clear picture of when each platform type is appropriate, what conditions make a site unsafe, and which precautions must be in place before any lift begins.
Sixty minutes of focused instruction. A certificate that documents what your operators know.
What You’ll Learn
Mobile elevated work platform training covers the decisions your operators make before every lift.
Platform types and selection
Identify the three main categories of mobile elevated work platforms and the operational differences between them. Describe when each MEWP type is the appropriate choice for a given task or site condition. Recognize the distinctions between indoor and outdoor use requirements for specific platform models.
Hazard recognition at height
Identify the hazards associated with working at elevation, including tip-over risk, electrocution, and falling-object exposure. Evaluate site conditions that increase risk before a platform is deployed.
Worksite planning
Apply a structured approach to planning MEWP use on a worksite, accounting for ground stability, overhead obstructions, and traffic. Demonstrate how to prepare the work area so that both operators and workers on the ground remain protected throughout the lift.
Safe operating precautions
Describe the main precautions that must be in place when operating a mobile elevated work platform. Apply best practices for platform operation that reduce the likelihood of equipment-related incidents.
Assessment and completion
Work through an 80% pass-mark assessment that confirms competency across all course topics. Explore the certificate of completion issued upon passing, which serves as a documentable record of operator training.
Every outcome maps to a decision your operators make on the ground, before the platform moves.
Who Should Take This Course?
MEWP operators responsible for pre-use inspections, safe positioning, and keeping the platform within rated limits on every shift should enrol. Site supervisors who approve work-at-height tasks and need to verify that operators understand the hazards and precautions before a lift begins will find this course essential. Safety coordinators who develop and audit worksite safety plans and need a documented training record for platform operators can assign it to their teams. Maintenance and facilities workers who use scissor lifts, boom lifts, or other elevated platforms to access equipment, lighting, or structures benefit from the training. New hires and returning workers being introduced to MEWP operation for the first time or refreshing their knowledge after time away from the equipment should complete it. Employers and training managers who need a cost-effective, certificate-bearing course they can assign to multiple workers across a team or organization will find it practical.
Why Take This Course?
Mobile elevated work platforms are everywhere. Construction, maintenance, and industrial worksites rely on them daily, and that prevalence carries serious risk. Operator knowledge is a direct factor in whether workers return home at the end of the shift.
The wrong platform choice is a documented cause of incidents. Operators who have not learned to recognize site-specific hazards or select the correct equipment for the conditions are more exposed. This mobile elevated work platform course gives you a repeatable assessment framework to apply before any lift begins.
Your training record is evidence. Organizations that document operator training create a clear record showing workers were equipped to perform the task safely. That record matters when incidents are investigated and corrective actions are reviewed.
Height changes everything. A misjudgement recoverable at ground level can be fatal on a platform. MEWP operator training that addresses height-specific hazards and precautions is the difference between a controlled lift and an uncontrolled outcome.
Key Benefits
Your operators receive a certificate of completion that documents their MEWP training for site records and audits, ready at the end of the assessment. Operators who can identify tip-over risk, electrocution hazards, and unstable ground conditions before a lift are less likely to be involved in the incidents that injure workers. Workers finish the full mobile elevated work platform training in a single session with no travel, no classroom booking, and no scheduling delays. The planning and precaution skills you build here apply each time you step onto a MEWP, not only during the training session itself. Organizations get a certificate-bearing, assessable MEWP training course at a fixed per-seat cost of $79.99 per enrolment with no hidden fees.
Course Details
- Course length: 60 minutes
- Format: Online, self-paced
- Passing mark: 80%
- Certificate: Certificate of completion included
- Price: $79.99 per enrolment
Frequently Asked Questions
How long does the MEWP training course take to complete?
The Mobile Elevated Work Platform (MEWP) Training course takes 60 minutes in total. You can complete it in a single session on any device.
What is the passing score for the mobile elevated work platform course?
You need 80% or higher on the assessment to pass. Learners who meet that threshold receive a certificate of completion.
Is a certificate included with the MEWP training?
Yes, the Mobile Elevated Work Platform (MEWP) Training course includes a certificate of completion for every learner who passes the assessment.
Who should take this mobile elevated work platform training course?
This MEWP training course suits operators, site supervisors, safety coordinators, maintenance workers, and any worker who uses or oversees the use of mobile elevated work platforms on a worksite.
How much does the MEWP training course cost?
Enrolment is $79.99 per learner, with a certificate of completion included.
What types of mobile elevated work platforms does the course cover?
The course examines the three main MEWP types, covering their appropriate use cases and the differences between indoor and outdoor operation.
Enrol your operators in the Mobile Elevated Work Platform (MEWP) Training course today and give them the hazard recognition skills and certificate of completion they need before the next lift begins.
Course Details
Course Length
This course will take roughly 60 minutes
Passing Mark
To pass this training course, you need to score 80% or higher on the quiz
Certificate
Upon the successful completion of this course a certificate with your name will be stored on your profile and available to print
Additional Training Courses
Machine Guarding Online
As a vital measure in worker safety, Machine Guarding plays an instrumental role in preventing machine operation-related injuries. It is crucial that every machine...
HAZWOPER: Refresher for Emergency Responders: Hazardous Substance Recognition and Identification
This HAZWOPER Refresher for Emergency Responders course aims to guide learners about the various tools and techniques to discern and ascertain hazardous substances. It...
Manufacturing and Industrial Safety Training (Tagalog)
This digital Manufacturing and Industrial Safety Training program equips you, the employee, with the knowledge, comprehension, and assurance necessary to function safely within the...