BIS Safety Software

Pallet Jack (Manual and Electric)

Learn manual and electric pallet jack safety in this 60-minute online course: operator responsibilities, components, pre-shift inspections, safe operation and load handling, battery charging and maintenance, and common hazards. Earn a certificate when you pass.

Pallet jack operators move loads across warehouse floors every shift. An unsecured load, a missed pre-shift defect, or a battery handled incorrectly can take a worker off the floor for weeks. This pallet jack training course offers operators and their employers a structured, online path to competent operation of both manual and electric equipment.

The course covers equipment anatomy, pre-shift inspection, load handling, hazard recognition, and battery maintenance. You finish with a certificate of completion that documents your readiness as an operator.

Aperçu du cours

This pallet jack operator training is organized into learning modules covering the key stages of safe equipment use, from first principles to daily practice. The modules include:

• Certification responsibilities as a pallet jack operator
• Components of electric and manual pallet jacks
• Pre-shift inspections
• Safe operation practices, including load handling and securing a load
• How to charge and maintain electric pallet jack batteries
• How to recognize, avoid, or minimize common hazards associated with pallet jack operation

The course addresses both manual and electric equipment in parallel. Operators who work with either type, or who switch between them, come away with a complete picture of each machine’s demands.

Practical. Structured. Built for the warehouse floor.

What You’ll Learn

This pallet jack course maps every topic to a task you perform on the job.

Operator responsibilities

• Recognize the certification responsibilities of a pallet jack operator before, during, and after each shift.
• Describe the regulatory context relevant to pallet jack operation, including CSA Standard B335-15 and applicable occupational health and safety legislation.

Equipment anatomy

• Identify the components of electric and manual pallet jacks, including the parts that differ between the two types.
• Recognize the condition indicators that tell you a component needs attention before the machine leaves the charging area.

Inspection and pre-shift checks

• Demonstrate how to carry out a pre-shift inspection on both manual and electric units, working through each checkpoint in a repeatable sequence.
• Apply inspection findings to a go/no-go decision before a load is placed on the forks.

Safe operation and load handling

• Identify and apply safe operation practices, including load handling and securing a load, across common warehouse and distribution scenarios.
• Evaluate load weight, placement, and travel path to reduce the risk of tip-over, dropped loads, or pedestrian contact.

Battery care and maintenance

• Describe how to charge and maintain electric pallet jack batteries, covering both lithium-ion and lead-acid chemistries.
• Apply correct battery handling procedures to avoid chemical or thermal hazards during charging.

Hazard recognition and control

• Recognize, avoid, or minimize common hazards associated with pallet jack operation, including surface conditions, blind corners, and overloading.
• Work through a hazard-control decision sequence for the risks most frequently encountered on the job.

Assessment and certification

• Demonstrate course knowledge by achieving the 80% pass mark on the final assessment to earn a certificate of completion.

Every outcome maps directly to a task operators perform on the job.

Who Should Take This Course?

• Warehouse and distribution operators. You drive manual or electric pallet jacks regularly and need documented pallet jack operator training to back up your time on the floor.
• Retail stockroom workers. You move palletized product in tight back-of-store aisles where pedestrian traffic is constant and margin for error is small.
• New equipment operators. You have just been assigned to pallet jack duties and need a structured introduction to safe operation before your first shift begins.
• Supervisors and team leads. You oversee pallet jack operators and can use a working knowledge of inspection standards, load-handling rules, and battery protocols to manage your team more effectively.
• Health and safety coordinators. You are building or updating a workplace training program and may be looking for a course that references CSA Standard B335-15 and applicable occupational health and safety legislation.
• Employers and training managers. You may be looking for a cost-effective, certificate-bearing option that helps document operator training across your workforce.

Why Take This Course?

Pallet jacks carry real, immediate injury risk. Crushed feet, tip-overs, dropped loads, and battery fires are among the outcomes associated with skipped inspections and undertrained operators. This pallet jack training course addresses each failure point directly.

The regulatory context is specific. This course is built to reference CSA Standard B335-15 and applicable occupational health and safety legislation. Your training record reflects named industry standards, not a generic safety overview.

Battery hazards are growing. Electric pallet jacks are increasingly common, and lithium-ion cells can enter thermal runaway when charged incorrectly or stored in poor conditions. The course treats battery care as a core skill, not a footnote.

A certificate creates a concrete record. Documented pallet jack operator training gives your organization a record that training was delivered and assessed. That record carries weight with auditors, insurers, and joint health and safety committees.

Key Benefits

• Certificate of completion issued immediately. You receive a printable credential the moment you clear the 80% pass mark.
• Fewer dropped loads and tip-overs on the floor. Operators who correctly secure a load and read surface conditions before moving reduce the physical damage that grounds equipment and injures workers.
• Sixty-minute online format fits inside a single shift. You complete the entire pallet jack course on any device, eliminating the scheduling cost and shift disruption of classroom sessions.
• Skills that transfer across both equipment types. Because the course covers manual and electric pallet jacks in parallel, you can work with either machine without returning for a separate refresher.
• Alignment with CSA Standard B335-15 and the Occupational Health and Safety Act. The certificate references recognized industry standards, which may carry weight with auditors, insurers, and joint health and safety committees.

Détails du cours

• Durée 60 minutes
• Format: Online, self-paced
• Pass mark: 80%
• Certificate: Certificate of completion included
• Price: $99.99
• Accreditation: References CSA Standard B335-15 and the Occupational Health and Safety Act

Foire aux questions

How long does the pallet jack training course take to complete?

The pallet jack course runs 60 minutes from start to finish. You can complete it within a single shift, on any device, without scheduling a classroom or a trainer.

What score do I need to pass the pallet jack course?

You need 80% to pass. If you do not reach that mark on the first attempt, you can review the material and retake the assessment.

Does the pallet jack operator course include a certificate?

Yes, the Pallet Jack (Manual and Electric) course issues a certificate of completion automatically once you achieve the 80% pass mark. No additional steps are required.

Which standards is this pallet jack course aligned with?

The course is aligned with CSA Standard B335-15 and the Occupational Health and Safety Act. Both are named in the course content and reflected in the certificate.

Who should take this pallet jack training course?

Anyone who operates, supervises, or manages the training of manual or electric pallet jack operators should take this course. That includes warehouse workers, retail stockroom staff, supervisors, health and safety coordinators, and training managers.

Does the course cover both manual and electric pallet jacks?

Yes. The curriculum addresses both equipment types throughout, including a dedicated segment on lithium-ion and lead-acid battery care specific to electric units.

Enrol in the Pallet Jack (Manual and Electric) course today and have your certificate of completion in hand within the hour.

Cours de formation supplémentaires

Transport d'agrégats

Notre cours en ligne sur l'instruction de l'équipement de transport d'agrégats vise à fournir aux apprenants des connaissances sur les différents types d'équipements de transport d'agrégats et les...

Acheter maintenant | $49,99 CAD

Walking on Icy Surfaces

Our Walking on Icy Surfaces online course offers practical techniques to help you avoid injuries from slips and falls on icy terrain.

Acheter maintenant | $29,99 CAD

Lockout / Tagout – Vivid

The aim of this tutorial is to bring about awareness among all employees regarding the presence of hazardous energy sources; the isolation of such...

Acheter maintenant | $69,99 CAD