BIS Safety Software

Asphalt Safety

Learn essential asphalt safety in this 60-minute online course covering hot asphalt burns, fumes, silica, traffic and equipment hazards, heat stress, PPE, safe work practices, and emergency response. Earn a certificate after passing.

Asphalt paving crews face a combination of hazards that few other trades encounter in a single shift: superheated material, toxic fumes, heavy moving equipment, and live traffic, all often under peak summer heat. This asphalt safety training course is built to give workers practical knowledge to recognize those hazards before they cause harm and to apply the controls that support crew safety across the paving operation.

Designed for anyone who works on or near an asphalt paving operation, this 60-minute online course covers thermal burns, respiratory risks, struck-by hazards, heat stress, PPE selection, and emergency response. Learners who pass the 80% assessment earn a certificate of completion they can present on site.

Aperçu du cours

This asphalt safety training course is organized into eight modules, progressing from foundational hazard knowledge through to emergency response. The modules are:

• What Asphalt Is and Why It’s Hazardous
• Thermal Burns From Hot Asphalt and First Aid
• Respiratory Hazards: Fumes, Hydrogen Sulfide, and Silica
• Struck-By Hazards: Traffic and Equipment
• Heat Stress and Prevention
• Personal Protective Equipment
• Safe Work Practices and Procedures
• Urgence

The course opens by establishing what makes asphalt dangerous at paving temperatures, giving workers a grounding in the physical and chemical properties that underlie the other risks on site.

Modules on burns and respiratory hazards address the two most direct exposure risks: contact with material above 135 degrees Celsius and the fumes, hydrogen sulfide, and silica dust that rise from the mat.

The back half shifts to the worksite environment, covering moving equipment, live traffic, heat stress, and the PPE and procedures that address exposure across those hazard categories.

Every module connects hazard, control, and action.

What You’ll Learn

This asphalt safety course covers the knowledge you need to walk onto a paving site and identify what can hurt you and how to stop it.

Asphalt hazard recognition

• Describe the main hazards of working with and around hot asphalt, including material temperatures, fume generation, and worksite exposure points.
• Identify the health effects of asphalt fumes and silica dust on the respiratory system and recognize which tasks generate the highest exposure.

Burn response and first aid

• Explain how to recognize an asphalt burn by severity and describe the correct first-aid steps to take before professional medical help arrives.
• Describe how hot asphalt behaves on contact with skin and why standard burn protocols require adjustment for this material.

Worksite traffic and equipment safety

• Recognize struck-by hazards in a road work zone, including moving equipment, reversing vehicles, and live public traffic.
• Identify the site conditions and worker positions that increase struck-by risk and apply safe positioning practices that reduce exposure.

Heat stress and environmental controls

• Describe the physical signs of heat stress and heat stroke in a paving crew member and explain the prevention steps that apply during hot-weather operations.

PPE and safe work practices

• Identify the personal protective equipment recommended for asphalt work, including garment types, respiratory protection, and skin coverage appropriate to each task.
• List the safe work practices that protect both individual workers and the broader crew across the full paving operation.

Assessment and certification

• Demonstrate course knowledge by scoring 80% or higher on the final assessment to earn a certificate of completion for this asphalt safety training.

Name the hazard, state the control, and show the certificate.

Who Should Take This Course?

• Asphalt paving crew members who work directly with or adjacent to hot mix material and want to recognize burn, fume, and heat hazards before each shift.
• Road construction equipment operators who run pavers, rollers, and other heavy equipment in active work zones where struck-by risks are present throughout the day.
• Traffic control personnel who stand in or near live traffic lanes on paving projects and need to understand the full hazard environment around them, not just flagging procedures.
• Site supervisors and foremen who oversee crew safety on paving projects and want a documented record that workers have completed structured hazard training.
• Safety coordinators and OHS advisors who manage training records for road construction contractors and need a consistent, assessable course they can assign across multiple crews.
• New hires entering road construction who are joining a paving operation for the first time and need a structured introduction to asphalt-specific hazards before they step onto the mat.

Why Take This Course?

Asphalt paving stacks multiple serious hazards at once. On a single shift, a crew member may encounter thermal burn risk, respiratory exposure from fumes and silica dust, struck-by risk from equipment and traffic, and heat stress from both the material and the ambient temperature. Each of those hazards can cause a serious injury on its own: burns from material above 135 degrees Celsius can cause deep tissue damage, a struck-by incident in a road work zone can be fatal, and heat stroke can incapacitate a worker rapidly during summer paving.

Workers who can name each hazard are generally better positioned to avoid it. This asphalt safety course gives your crew the knowledge to identify risks and describe the controls before a shift starts, covering the major hazard categories found on a paving site in a single 60-minute session.

Supervisors can benefit from a documented training record. Assigning this course before paving work begins gives you evidence that workers received structured, assessable hazard training, which supports your site safety program and any contractor pre-qualification process.

Key Benefits

• Certificate of completion included. Workers receive a printable certificate upon passing the 80% assessment, giving supervisors and contractors a tangible record of completed asphalt safety training.
• Covers the hazards most likely to cause a lost-time injury. Thermal burns, struck-by incidents, and heat stroke are among the most serious outcomes on a paving site; this course addresses all three in a single session.
• Estimated completion time: 60 minutes on any device. The online format requires no classroom booking and no travel; a crew member can finish the full asphalt safety training in a single hour before a project begins.
• Hazard knowledge that transfers across paving seasons. The burn response steps, PPE guidance, and struck-by controls in this course are designed to apply broadly across asphalt paving operations, so your workers can carry the skills job after job.
• Priced at $39.99 per learner. At under forty dollars per seat, you get documented, assessable training at a cost that a single avoided recordable incident could offset many times over.

Détails du cours

• Course length: 60 minutes
• Format: Online, self-paced
• Passing mark: 80%
• Certificate: Certificate of completion included upon passing
• Price: $39.99 per learner

Questions fréquemment posées

How long does the asphalt safety course take to complete?

The asphalt safety course runs for 60 minutes and is self-paced, so you can work through it on your own schedule before a project begins.

What score do I need to pass the asphalt safety training?

You need 80% on the final assessment. Reach that mark and your certificate of completion is issued automatically, giving you a record that can support your site’s OHS documentation requirements.

Is a certificate included with this course?

Yes, the Asphalt Safety course includes a certificate of completion, issued when you pass the 80% assessment.

Who should take this asphalt safety training course?

This course is designed for anyone who works on or near an asphalt paving operation, including crew members, equipment operators, traffic control personnel, site supervisors, and safety coordinators.

What hazards does the asphalt safety course cover?

The course covers thermal burns from hot asphalt, respiratory hazards including fumes, hydrogen sulfide, and silica dust, struck-by hazards from traffic and equipment, heat stress, PPE requirements, safe work practices, and emergency response.

How much does the asphalt safety online course cost?

The asphalt safety online course is priced at $39.99 per learner, with the certificate of completion included.

Cours de formation supplémentaires

H2S Hydrogen Sulfide Training

This online H2S Hydrogen Sulfide Training program educates you on the threats posed by H2S and SO2 gases and outlines the necessary prevention steps,...

Acheter maintenant | $44,99 CAD

Travailler en toute sécurité

The course Working Safely in Laboratory Safety imparts critical know-how on optimal safety practices in the lab, identifying potential hazards, adhering to protocols during...

Acheter maintenant | $69,99 CAD

Pedestal Mounted Crane – Operator Safety (OSHA)

The online course on Pedestal Mounted Cranes delves into crucial aspects surrounding these cranes, including their elements, potential hazards, rigging, functions, and inspections. This...

Acheter maintenant | $99,99 CAD