BIS Safety Software

Hot Work Safety – CAN

Learn hot work safety in this 60-minute online course for Canadian workplaces: designated and non-designated areas, fire, explosion, fume and other hazards, the hot work permit system, pre-work checks, fire watch and emergency response. Earn a certificate when you pass.

A single spark from a grinder or welding torch can ignite hidden combustibles that smoulder undetected for hours before a fire takes hold. This hot work safety training course gives Canadian workers the practical knowledge to identify hazards, set up fire watch coverage, and respond when something goes wrong.

Designed for welders, torch operators, supervisors, permit requesters, and anyone who shares a workspace where hot work is performed, the course delivers job-ready learning modules that cover everything from reading a hot work permit to operating a fire extinguisher under pressure.

Aperçu du cours

This hot work safety training course covers every stage of a safe hot work operation, from hazard recognition through emergency response. Each module maps directly to a job action you perform on site.

• What hot work is and the jobs it covers
• Designated and non-designated hot work areas
• Hot work hazards (fire, explosion, burns, fumes, electrical shock, compressed gas, noise, confined spaces, and falls)
• The hot work permit system
• Pre-work precautions and area preparation
• When hot work should not be done
• The fire watch role and duties
• PPE for hot work
• Equipment safety (cables, cylinders, regulators, hoses, and torches)
• Special hot work situations (torch-applied roofing, grinding, thawing pipes, confined spaces, combustible dust, heat guns, soldering, and brazing)
• Roles and responsibilities on site
• Emergency response and fire extinguisher use

Equipment safety content addresses the physical tools you handle every day. You learn to spot a defective hose, an unsecured cylinder, or a worn regulator before it becomes an incident.

The special situations module covers torch-applied roofing, grinding operations, pipe thawing, confined-space welding, and combustible dust environments. Standard precautions alone are not sufficient for these conditions.

A permit to complete, a hazard to flag, and an extinguisher to reach.

What You’ll Learn

This hot work safety course covers learning modules that span the full scope of a hot work operation.

Defining hot work and its hazards

• Identify what qualifies as hot work and list the common job types it covers on a Canadian worksite.
• Describe the main hazards, including fire, explosion, burns, fumes, electrical shock, compressed gas, noise, confined spaces, and falls.

Permit and precautions

• Explain how a hot work permit system works and what it authorizes on site.
• Identify the area-preparation steps and precautions that must be in place before any hot work begins.

Fire watch and emergency response

• Describe the role and specific duties of a fire watch during and after a hot work operation.
• Explain the steps you take if a fire starts while hot work is underway.

PPE and equipment safety

• Apply knowledge of the correct personal protective equipment required for hot work tasks.
• Recognize the safety requirements for cables, cylinders, regulators, hoses, and torches.

Special hot work situations

• Recognize the additional precautions required for torch-applied roofing, grinding, confined spaces, and combustible dust environments.

Assessment and completion

• Demonstrate your knowledge by scoring 80% or higher on the final assessment.
• Earn a certificate of completion that documents your hot work safety training for site records.

A permit read, a fire watch briefed, and a certificate on file.

Who Should Take This Course?

• Welders and torch operators. You perform hot work directly and need permit requirements, PPE selection, and equipment checks confirmed before every job.
• Fire watch personnel. You monitor the hot work area and must know your specific duties, how long your watch runs, and when to call an emergency.
• Supervisors and permit requesters. You authorize hot work and are accountable for confirming that every precaution and area-preparation step is in place before work starts.
• Workers in shared spaces. You occupy the same building or an adjacent area where hot work is underway and need to know the hazards and your emergency response role.
• Safety officers and site coordinators. You oversee hot work programs and need a consistent training baseline across every role on site.
• Workers new to Canadian worksites. You are joining operations where welding, cutting, grinding, or torch work is routine and hot work permits are already in use.

Why Take This Course?

Hot work fires do not stay contained, and a spark can travel metres, settle in a wall cavity, and smoulder for hours before igniting a full fire. Anyone in the building can carry that risk, not only the person holding the torch.

Skipping a permit step has a real price: fires destroy equipment and structures. Explosions in spaces where flammable gases have accumulated can take a crew off site for weeks. Burn injuries mean lost time, replacement workers, and claims.

Every role carries a gap this course closes. A fire watch who does not know their duties, a supervisor who approves work in an uncleared area, and a welder who skips a cylinder inspection are three separate failure points. This online hot work training gives each role a clear set of actions to take before, during, and after the job.

Sixty minutes produces a documented record. You finish with a certificate of completion showing you have been trained on permits, PPE, fire watch duties, equipment safety, and emergency response, a record you can hand to a supervisor or safety officer on request.

Détails du cours

• Durée 60 minutes
• Format: Online, self-paced
• Pass mark: 80%
• Certificate: Certificate of completion included
• Price: $49.99 per learner

Key Benefits

• Certificate of completion issued on passing. Your credential documents hot work safety training and is ready to present to a supervisor or safety officer the same day you finish.
• Hazard-specific precautions, not generic warnings. Fire, explosion, fume exposure, and equipment failure are each addressed with concrete actions, so you leave knowing what to do, not just what to avoid.
• Sixty minutes, fully online, no scheduling required. You complete the entire hot work safety course in one session with no travel, no classroom booking, and no shift disruption.
• One course covers every role on site. Welders, fire watch personnel, supervisors, and workers in adjacent areas all train from the same content, giving your crew a consistent knowledge base from a single enrolment.
• Fixed price of $49.99 per learner. There is no subscription, no hidden fee, and no minimum seat count, so it is straightforward to budget for one worker or a full crew.

Foire aux questions

How long does the hot work safety training course take to complete?

The hot work safety training course runs for 60 minutes and is fully self-paced. You can finish it in one session or pause and return as your schedule allows.

Is a certificate included when I finish the hot work safety course?

Yes, the Hot Work Safety – CAN course includes a certificate of completion issued to every learner who passes the final assessment.

What score do I need to pass this hot work training?

You need 80% or higher on the course assessment to earn your certificate of completion.

Who should take this hot work safety course?

The course is built for welders, torch operators, fire watch personnel, supervisors, permit requesters, and anyone who works in or near an area where hot work is performed, not only the person doing the cutting or welding.

What topics does the hot work safety training cover?

The course covers hot work definitions and hazards, designated work areas, the permit system, pre-work precautions, fire watch duties, PPE, equipment safety, special situations including confined spaces and combustible dust, and emergency response with fire extinguisher use.

How much does this online hot work safety course cost?

The course is priced at $49.99 per learner with no subscription or additional fees.

Enrol in the Hot Work Safety – CAN course today and earn your certificate of completion in 60 minutes.

Cours de formation supplémentaires

The Authentic Leader for the Safety Professional

The Authentic Leader for the Safety Professional is a course designed to debunk the myth that leadership is an inherent trait, asserting instead that...

Acheter maintenant | $49,99 CAD

HAZWOPER : Décontamination

HAZWOPER : DÉCONTAMINATION Le cours HAZWOPER : Décontamination est conçu pour fournir aux apprenants des connaissances approfondies sur l'importance des appareils respiratoires, leurs divers composants et types...

Acheter maintenant | $49,99 CAD

Hazard Communication – Safety Data Sheets

The Hazard Communication - Safety Data Sheets online course provides a comprehensive understanding of SDSs to supervisors and on-ground workforce engaged in sectors necessitating...

Acheter maintenant | $79,99 CAD