BIS Safety Software

Industrial Ergonomics (CAN)

Learn industrial ergonomics in this 60-minute online course for Canadian workers: how MSDs develop, the six ergonomic risk factors, safe lifting, the hierarchy of controls, and Canadian legal duties. Pass the 80% assessment to earn a certificate.

Workers who lift, carry, reach overhead, and operate vibrating tools face a slow accumulation of physical stress that rarely announces itself until real damage is done. This industrial ergonomics training course gives Canadian workers and their supervisors the tools to spot that damage before it starts, and to change the job before the body pays the price.

The 60-minute online course covers how musculoskeletal disorders (MSDs) develop, the six risk factors that drive them, Canadian legislative duties, and the practical controls that reduce exposure at the source. Learners who pass the 80% final assessment earn a certificate of completion.

Aperçu du cours

This industrial ergonomics training moves from foundational concepts through Canadian legal duties and practical job-level controls. The course is organized into 12 modules:

• What Industrial Ergonomics Is (and Isn’t)
• Industrial Ergonomics Versus Office Ergonomics
• Common Myths About Musculoskeletal Injuries
• How MSDs Develop: Micro-Trauma, Cumulative Loading, and Recovery
• The Three Stages of an MSD
• The Six Ergonomic Risk Factors: Force, Posture, Duration and Recovery, Repetition, Contact Stress, and Vibration
• Amplifiers: Cold, Heat, Lighting, Footing, and Work Pace
• Assessing the Risk in Your Own Tasks
• Manual Materials Handling and Safe Lifting
• The Power Zone, Team Lifts, and Mechanical Aids
• The Hierarchy of Controls Applied to Ergonomics
• Canadian Legislation, Standards, Roles, and Worker Rights

You first learn how injuries accumulate over time, then gain the vocabulary to assess your own tasks, then work through the controls and legal framework that govern how those tasks should be changed. Every module delivers a concrete action you can take before your next shift.

Every module connects hazard, control, and action.

What You’ll Learn

This industrial ergonomics course builds your ability to assess risk, apply controls, and exercise your rights as a Canadian worker.

Foundations of industrial ergonomics

• Identify what industrial ergonomics covers in physically demanding work environments and distinguish it from office-based applications.
• Describe the difference between acute injury and the cumulative micro-trauma process that produces most musculoskeletal disorders over a working career.

How MSDs develop and progress

• Recognize the early physical warning signs of a musculoskeletal disorder and explain why reporting them at stage one changes the outcome.
• Describe the three-stage progression of an MSD and the point at which recovery without intervention becomes unlikely.

Risk factors and amplifiers

• Identify the six ergonomic risk factors (force, posture, duration and recovery, repetition, contact stress, and vibration) and the workplace conditions that make each one worse.
• Apply a task-level risk assessment to your own work using the amplifiers covered: cold, heat, lighting, footing, and work pace.

Safe lifting and materials handling

• Explain how to plan and perform a lift safely, including when the load or environment requires a mechanical aid or a team lift.
• Demonstrate the principles of the power zone and apply them to common manual materials handling tasks.

Controls and Canadian legal duties

• Describe the hierarchy of controls as it applies to ergonomic hazards, from elimination through to administrative measures.
• Explain the responsibilities that Canadian legislation and standards such as CSA Z1004 and the Canada Labour Code Part II place on employers, supervisors, and workers.
• Identify your rights as a worker under Canadian health and safety law as it applies to ergonomic risk.

Assessment and certification

• Complete a final assessment with a pass mark of 80% to earn a certificate of completion that documents your industrial ergonomics training.

Name the hazard, state the control, and show the certificate.

Who Should Take This Course?

• Industrial and warehouse workers who lift, carry, push, pull, or operate vibrating tools regularly and need to recognize MSD risk before cumulative loading produces an injury.
• Trades workers and field crews who kneel, reach overhead, and work in awkward postures on construction, maintenance, or resource-sector sites across Canada.
• Supervisors and team leads who are responsible for identifying ergonomic hazards in their crew’s tasks and for knowing when a job needs redesigning.
• Health and safety representatives who conduct workplace inspections and need working knowledge of the six risk factors, the hierarchy of controls, and the Canadian legislative framework.
• Employers and safety managers who want a documented record that their workforce has completed ergonomics training covering CSA Z1004 and the Canada Labour Code Part II.
• New workers in physically demanding roles who are entering an industrial environment and need a baseline understanding of how musculoskeletal disorders develop from day one.

Why Take This Course?

Musculoskeletal disorders build up quietly. MSDs are frequently reported and can be costly in the Canadian industrial workplace. They accumulate across seasons and years, so the window to intervene is long but easy to miss without the right knowledge.

Canadian law assigns duties to every role. Employers, supervisors, and workers each carry specific obligations under the Canada Labour Code Part II and provincial and territorial health and safety legislation. This course covers those responsibilities directly, including the guidance set out in CSA Z1004.

The hierarchy of controls changes what you do next. You learn to address ergonomic hazards at the source, eliminating or engineering out the problem rather than relying on technique alone. A stage-one symptom is recoverable; a stage-three one often is not. This industrial ergonomics training builds that recognition into your daily awareness so you act before the damage compounds.

Key Benefits

• Certificate of completion included. A shareable certificate records your industrial ergonomics training for employer files, site audits, or regulatory review.
• Reduced exposure to career-limiting MSDs. Workers who can name the six risk factors in their own tasks have a concrete method for flagging hazardous conditions before cumulative loading causes injury.
• 60-minute online format, no shift disruption. Your crew completes the course in a single hour with no travel, no classroom booking, and no full day pulled from production.
• Skills grounded in Canadian legislation and CSA Z1004. The legal and standards knowledge covered applies across provincial, territorial, and federal jurisdictions, so it travels with you to any Canadian worksite.
• Priced at $79.99 per learner. A fixed per-seat cost with no subscription or seat minimum makes this accessible for individual workers and small crews.

Détails du cours

• Course length: 60 minutes
• Format: Online, self-paced
• Passing mark: 80%
• Certificate: Certificate of completion included upon passing
• Price: $79.99 CAD per learner
• Jurisdiction: Canada; covers provincial and territorial health and safety legislation, the Canada Labour Code Part II, and CSA Z1004

Questions fréquemment posées

How long does the industrial ergonomics training take to complete?

The Industrial Ergonomics (CAN) course is 60 minutes and completed entirely online at your own pace.

What score do I need to pass the industrial ergonomics training?

You need 80% on the final assessment to pass and receive your certificate of completion.

Is a certificate included when I finish the course?

Yes, the Industrial Ergonomics (CAN) course includes a certificate of completion issued upon passing the final assessment.

Which Canadian regulations and standards does this ergonomics course cover?

The course covers provincial and territorial health and safety legislation, the Canada Labour Code Part II, and CSA Z1004.

Who should take this industrial ergonomics course?

This course suits workers in physically demanding roles, including trades, warehouse, and field crews, as well as supervisors, health and safety representatives, and employers who need documented ergonomics training for their teams.

How much does the industrial ergonomics online course cost?

The Industrial Ergonomics (CAN) course is priced at $79.99 per learner, with the certificate of completion included.

Enrol in the Industrial Ergonomics (CAN) course and give your workers the tools to identify MSD risk factors, apply the hierarchy of controls, and protect a full career.

Cours de formation supplémentaires

Bulldozer (Track & Wheel Dozers) – Operator Safety (CAN)

This Bulldozer Operator Safety Training course for Canada Compliance caters to both track and wheel bulldozer operators. OSHA's classroom requirements for operator safety training...

Acheter maintenant | $99,99 CAD

HAZWOPER: Temperature Extremes

HAZWOPER: TEMPERATURE EXTREMES Hazardous waste poses an ongoing threat to people, wildlife, and the environment. Workers tasked with the cleanup process of these sites...

Acheter maintenant | $49,99 CAD

Sécurité basée sur le comportement (SBC)

Les accidents du travail ne sont pas seulement coûteux, ils sont aussi prévisibles et évitables. Notre cours en ligne de sécurité comportementale vise à accroître la vigilance envers...

Acheter maintenant | $79,99 CAD